Switch (Mechanical 1x2 Latching or Non Latching) (Best)

features	applications	patents
unmatched low cost low insertion loss high channel isolation highly stable and reliable epoxy-free optical path latching or non-latching	configurable optical add/drop optical signal routing optical network protectioni/restoration transmitter and receiver protection network test system instrumentation	patent pending

fiberwms series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. this is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. the switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. the ms fiberoptic switches are true switching solution for optical networking applications.

performance specifications

parameter	specification
operating wavelength (nm)	1260~1360 or 1510~1610		1310/1550 �� 40
insertion loss (db)	p grade	a grade	p grade	a grade
insertion loss (db)	<0.5	<0.8	<0.7	<1.0
wavelength dependent loss (wdl) (db)	<0.25	<0.25	<0.30	<0.30
polarization dependent loss (pdl) (db)	<0.05	<0.05	<0.05	<0.05
temperature dependent loss(wdl)(db)	<0.15	<0.20	<0.15	<0.20
channel cross talk (db)	>55	>55	>55	>55
repeatability (db)	��0.02
return loss (db)	>55
switching speed (typ.) (ms)	4(typ.)
operating voltage (v)	5
power handling (mw)	500
durability (cycles)	10 million
operating temperature (��c)	0 ~ +70
storage temperature (��c)	-45 ~ +85
fiber type	smf-28
fiber length (m)	1.0 +/- 0.1
physical dimension (lxwxh) (mm)	22.3x12.1x11.0

electrical pin configuration:

optical path		port1 to port2		port1 to port3
electric drive	non-latching	pin1	pin10
	latching	pin1	pin5	pin6	pin10
		v+	gnd	gnd	v+
sensor status	non-latching and latching	pin2-3, pin8-9 open		pin2-3, pin8-9 close
		pin3-4, pin7-8 close		pin3-4, pin7-8 open

specifications may change without notice

dimensions

ordering information

ms
option	operating wavelength	port	grade	pigtail style	fiber length	in/out connector
l= latching n=non-latching	15=1510~1610nm 13=1260~1360nm 35 =1310/1550nm	0102=1x2	p=p grade a=a grade	1=bare fiber 2 =900um jacket	1=1m 2 =2m	0=none 1=fc/apc 2=fc/pc 3=sc/apc 4=sc/pc 5=st 6=lc

Switch (Mechanical 1x2 Latching or Non Latching)

performance specifications

specification

p grade

a grade

p grade

a grade

electrical pin configuration:

dimensions

ordering information

ms

option

operating wavelength

port

grade

pigtail style

fiber length

in/out connector

Switch (Mechanical 1x2 Latching or Non Latching)